Suspension

Features:

• TOR exclusive USA-engineered powdered metal gusher bearing design enables grease to flow through the stud for reduced friction and enhanced strength and stability
• Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the ball joint
• TOR engineered steel composition (40cr+) results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
• An enlarged ball joint receptacle in the control arm can cause a loose ball joint fit. TOR exclusive design includes an oversized housing for a more secure fit
• Dust boot is re-installed and permanently attached to reduce contaminants, and increase durability and service life
• Full-ball type studs are manufactured using a cold-formed process to reduce imperfections and hold the tightest of tolerances
• TOR greaseable socket design allows new lubricant to flush contaminants from the assembly, reducing corrosion and wear
• Kit Includes: 2x Front Upper Suspension Ball Joint (Both Side)
• Kit Variations: KTR-104385
• Part Reference Numbers : BK500359 BJ85186PR BJ85186XL BJ85186 GS40546 MS40546 K500359 K500422 2601902 TK500422

Features:

• TOR exclusive USA-engineered powdered metal gusher bearing design enables grease to flow through the stud for reduced friction and enhanced strength and stability
• Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the ball joint
• TOR engineered steel composition (40cr+) results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
• An enlarged ball joint receptacle in the control arm can cause a loose ball joint fit. TOR exclusive design includes an oversized housing for a more secure fit
• Dust boot is re-installed and permanently attached to reduce contaminants, and increase durability and service life
• Full-ball type studs are manufactured using a cold-formed process to reduce imperfections and hold the tightest of tolerances
• TOR greaseable socket design allows new lubricant to flush contaminants from the assembly, reducing corrosion and wear
• Kit Includes: 2x Front Upper Suspension Ball Joint (Both Side) + 2x Front Lower Suspension Ball Joint (Both Side)
• Kit Variations: KTR-104391
• Part Reference Numbers : BK500359 BJ85186PR BJ85186XL BJ85186 GS40546 MS40546 K500359 K500422 2601902 TK500422 BK500318 BJ87005PR BJ87005XL BJ87005 GS40531 MS40531 K500318 2601885 TK500318

Features:

• TOR exclusive USA-engineered powdered metal gusher bearing design enables grease to flow through the stud for reduced friction and enhanced strength and stability
• Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the ball joint
• TOR engineered steel composition (40cr+) results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
• An enlarged ball joint receptacle in the control arm can cause a loose ball joint fit. TOR exclusive design includes an oversized housing for a more secure fit
• Dust boot is re-installed and permanently attached to reduce contaminants, and increase durability and service life
• Full-ball type studs are manufactured using a cold-formed process to reduce imperfections and hold the tightest of tolerances
• TOR greaseable socket design allows new lubricant to flush contaminants from the assembly, reducing corrosion and wear
• Forged, CNC-machined shell leads to high-quality, precision-made performance and additional strength
• Kit Includes: 2x Front Lower Suspension Ball Joint (Both Side)
• Part Reference Numbers : BK500366 BJ58025PR BJ58035PR BJ58035XL BJ58115PR BJ58115XL 539-745 539-746 539-756 BJ58025XL BJ58035 BJ58025 GS60525 MS60525 K500455 K500366 K500460 1060525 06510TBAA00 5122030AA01 51220T20A01 51220T20A02 51220TBAA01 51220TLA

Features:

• Complete Control Assembly Arm Pre-Assembled With Bushings, Mounts & Ball Joints (When Applicable) - No additional parts or tools required for installation
• TOR exclusive USA-engineered powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
• TOR exclusive USA-engineered metal bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
• Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the tie rod
• Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the control arm
• TOR engineered steel composition results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
• Full O.E. socket design with self-adjusting internal tension spring and high-strength polymer bearing
• Full-ball type studs use cold-formed manufacturing to reduce imperfections and hold the tightest of tolerances
• Kit Includes: 2x Front Lower Suspension Control Arm and Ball Joint Assembly (Both Side) + 2x Front Outer Steering Tie Rod End (Both Side)
• Part Reference Numbers : BK623491 CB86173PR CB86173 MS401247 GS401247 CMS401247 CK623491 K623491 RK623491 2608672 TK623491 BK623490 CB86174PR CB86174 MS401248 GS401248 CMS401248 CK623490 K623490 RK623490 2608673 TK623490 BES801110 TO85281PR TO85341PR

Features:

• Complete Control Assembly Arm Pre-Assembled With Bushings, Mounts & Ball Joints (When Applicable) - No additional parts or tools required for installation
• TOR exclusive USA-engineered powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
• TOR exclusive USA-engineered metal bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
• Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the tie rod
• Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the control arm
• TOR engineered steel composition results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
• Full O.E. socket design with self-adjusting internal tension spring and high-strength polymer bearing
• Kit Includes: 2x Front Lower Suspension Control Arm and Ball Joint Assembly (Both Side) + 2x Front Outer Steering Tie Rod End (Both Side)
• Kit Variations: KTR-104474
• Part Reference Numbers : BK623281 BK901214 CB60353PR CB60353 MS901214 GS901214 CMS901214 CK623281 CK623539 K623281 K623539 RK623281 RK623539 1412109 2608248 545002W200 545002W600 CP5269 BK623282 BK901215 CB60354PR CB60354 MS901215 GS901215 CMS901215

Features:

• Complete Control Assembly Arm Pre-Assembled With Bushings, Mounts & Ball Joints (When Applicable) - No additional parts or tools required for installation
• TOR exclusive USA-engineered powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
• TOR exclusive USA-engineered metal bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
• Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the tie rod
• Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the control arm
• TOR engineered steel composition results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
• Full O.E. socket design with self-adjusting internal tension spring and high-strength polymer bearing
• Kit Includes: 2x Front Lower Suspension Control Arm and Ball Joint Assembly (Both Side) + 2x Front Outer Steering Tie Rod End (Both Side)
• Kit Variations: KTR-104316 KTR-104521
• Part Reference Numbers : BK623549 CB59423PR CB59423 MS601229 GS601229 CMS601229 CK623549 K623549 RK623549 2608585 CP5538 CB4014 BK623548 CB59424PR CB59424 MS601230 GS601230 CMS601230 CK623548 K623548 RK623548 2608586 CP5539 CB4015 BES801205 TO50131XL

Features:

• Complete Control Assembly Arm Pre-Assembled With Bushings, Mounts & Ball Joints (When Applicable) - No additional parts or tools required for installation
• TOR exclusive USA-engineered powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
• TOR exclusive USA-engineered metal bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
• Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the tie rod
• Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the control arm
• TOR engineered steel composition results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
• Full O.E. socket design with self-adjusting internal tension spring and high-strength polymer bearing
• Kit Includes: 2x Front Lower Suspension Control Arm and Ball Joint Assembly (Both Side) + 2x Front Outer Steering Tie Rod End (Both Side)
• Kit Variations: KTR-104516
• Part Reference Numbers : BK501255 CM1251 CB91543PR CB91543 MS501255 GS501255 CMS501255 RK623586 2608691 13466362 23403024 39001025 39089342 84035532 84289689 CP5667 CB4020 BK501254 CM1250 CB91544PR CB91544 MS501254 GS501254 CMS501254 RK623587 2608690

Features:

• Complete Control Assembly Arm Pre-Assembled With Bushings, Mounts & Ball Joints (When Applicable) - No additional parts or tools required for installation
• TOR exclusive USA-engineered powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
• TOR exclusive USA-engineered metal bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
• Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the tie rod
• Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the control arm
• TOR engineered steel composition results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
• Full O.E. socket design with self-adjusting internal tension spring and high-strength polymer bearing
• Full-ball type studs use cold-formed manufacturing to reduce imperfections and hold the tightest of tolerances
• Kit Includes: 2x Front Lower Forward Suspension Control Arm and Ball Joint Assembly (Both Side) + 2x Front Outer Steering Tie Rod End (Both Side)
• Part Reference Numbers : BK623484 CB14453PR CB14453 MS101377 GS101377 CMS101377 CK623484 K623484 RK623484 2608209 31 12 6 854 723 CP5341 CB4018 BK623485 CB14454PR CB14454 MS101378 GS101378 CMS101378 CK623485 K623485 RK623485 2608210 31 12 6 854 724 C

Features:

• Complete Control Assembly Arm Pre-Assembled With Bushings, Mounts & Ball Joints (When Applicable) - No additional parts or tools required for installation
• TOR exclusive USA-engineered powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
• TOR exclusive USA-engineered metal bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
• Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the link kit
• Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the control arm
• TOR engineered steel composition results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
• Full O.E. socket design with self-adjusting internal tension spring and high-strength polymer bearing
• Kit Includes: 2x Front Upper Suspension Control Arm and Ball Joint Assembly (Both Side) + 2x Front Suspension Stabilizer Bar Link Kit (Both Side)
• Kit Variations: KTR-102286 KTR-102287 KTR-104511 KTR-104533
• Part Reference Numbers : BK622196 CB61058PR CB61058 MS801128 GS801128 CMS801128 CK622196 K622196 RK622196 2607810 TK622196 BK622198 CB61057PR CB61057 MS301115 GS301115 CMS301115 CK622198 K622198 RK622198 2607307 TK622198 BK750402 SL61172XL SL61172PR

Features:

• Complete Control Assembly Arm Pre-Assembled With Bushings, Mounts & Ball Joints (When Applicable) - No additional parts or tools required for installation
• TOR exclusive USA-engineered powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
• TOR exclusive USA-engineered metal bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
• Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the link kit
• Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the control arm
• TOR engineered steel composition results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
• Full O.E. socket design with self-adjusting internal tension spring and high-strength polymer bearing
• Kit Includes: 2x Front Lower Suspension Control Arm and Ball Joint Assembly (Both Side) + 2x Front Suspension Stabilizer Bar Link Kit (Both Side)
• Kit Variations: KTR-104448
• Part Reference Numbers : BK501255 CM1251 CB91543PR CB91543 MS501255 GS501255 CMS501255 RK623586 2608691 13466362 23403024 39001025 39089342 84035532 84289689 CP5667 CB4020 BK501254 CM1250 CB91544PR CB91544 MS501254 GS501254 CMS501254 RK623587 2608690

Features:

• Complete Control Assembly Arm Pre-Assembled With Bushings, Mounts & Ball Joints (When Applicable) - No additional parts or tools required for installation
• TOR exclusive USA-engineered powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
• TOR exclusive USA-engineered metal bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
• Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the link kit
• Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the control arm
• TOR engineered steel composition results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
• Full O.E. socket design with self-adjusting internal tension spring and high-strength polymer bearing
• Kit Includes: 2x Front Lower Suspension Control Arm and Ball Joint Assembly (Both Side) + 2x Front Suspension Stabilizer Bar Link Kit (Both Side)
• Kit Variations: KTR-104349 KTR-104521
• Part Reference Numbers : BK623549 CB59423PR CB59423 MS601229 GS601229 CMS601229 CK623549 K623549 RK623549 2608585 CP5538 CB4014 BK623548 CB59424PR CB59424 MS601230 GS601230 CMS601230 CK623548 K623548 RK623548 2608586 CP5539 CB4015 BK750678 SL50111XL

Features:

• Complete Control Assembly Arm Pre-Assembled With Bushings, Mounts & Ball Joints (When Applicable) - No additional parts or tools required for installation
• TOR exclusive USA-engineered powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
• TOR exclusive USA-engineered metal bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
• Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the link kit
• Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the control arm
• TOR engineered steel composition results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
• Full O.E. socket design with self-adjusting internal tension spring and high-strength polymer bearing
• Full-ball type studs use cold-formed manufacturing to reduce imperfections and hold the tightest of tolerances
• Kit Includes: 2x Front Lower Suspension Control Arm and Ball Joint Assembly (Both Side) + 2x Front Suspension Stabilizer Bar Link Kit (Both Side)
• Part Reference Numbers : BK623733 CB63293PR CB63293 MS901245 GS901245 CMS901245 CK623733 K623733 RK623733 2608680 CP5697 CB4023 BK623734 CB63294PR CB63294 MS901246 GS901246 CMS901246 CK623734 K623734 RK623734 2608681 CP5698 CB4024 BK750793 SL60242XL

Features:

• Complete Control Assembly Arm Pre-Assembled With Bushings, Mounts & Ball Joints (When Applicable) - No additional parts or tools required for installation
• TOR exclusive USA-engineered powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
• TOR exclusive USA-engineered metal bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
• Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the link kit
• Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the control arm
• TOR engineered steel composition results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
• Full O.E. socket design with self-adjusting internal tension spring and high-strength polymer bearing
• Full-ball type studs use cold-formed manufacturing to reduce imperfections and hold the tightest of tolerances
• Kit Includes: 2x Front Lower Forward Suspension Control Arm and Ball Joint Assembly (Both Side) + 2x Front Suspension Stabilizer Bar Link Kit (Both Side)
• Part Reference Numbers : BK623484 CB14453PR CB14453 MS101377 GS101377 CMS101377 CK623484 K623484 RK623484 2608209 31 12 6 854 723 CP5341 CB4018 BK623485 CB14454PR CB14454 MS101378 GS101378 CMS101378 CK623485 K623485 RK623485 2608210 31 12 6 854 724 C

Features:

• Complete Control Assembly Arm Pre-Assembled With Bushings, Mounts & Ball Joints (When Applicable) - No additional parts or tools required for installation
• TOR exclusive USA-engineered powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
• TOR exclusive USA-engineered metal bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
• Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the link kit
• Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the control arm
• TOR engineered steel composition results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
• Full O.E. socket design with self-adjusting internal tension spring and high-strength polymer bearing
• Full-ball type studs use cold-formed manufacturing to reduce imperfections and hold the tightest of tolerances
• Kit Includes: 2x Front Lower Suspension Control Arm and Ball Joint Assembly (Both Side) + 2x Front Suspension Stabilizer Bar Link Kit (Both Side)
• Part Reference Numbers : CM1163 CM1165 CB59493PR CB59493 MS601239 GS601239 CMS601239 CK623650 CK623651 K623650 K623651 RK623650 RK623651 2608643 CP5543 CM1162 CM1164 CB59494PR CB59494 MS601240 GS601240 CMS601240 CK623649 CK623652 K623649 K623652 RK62

Features:

• Complete Control Assembly Arm Pre-Assembled With Bushings, Mounts & Ball Joints (When Applicable) - No additional parts or tools required for installation
• TOR exclusive USA-engineered powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
• TOR exclusive USA-engineered metal bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
• Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the link kit
• Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the control arm
• TOR engineered steel composition results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
• Full O.E. socket design with self-adjusting internal tension spring and high-strength polymer bearing
• Full-ball type studs use cold-formed manufacturing to reduce imperfections and hold the tightest of tolerances
• Kit Includes: 2x Front Lower Suspension Control Arm and Ball Joint Assembly (Both Side) + 2x Front Suspension Stabilizer Bar Link Kit (Both Side)
• Part Reference Numbers : BK623281 BK901214 CB60353PR CB60353 MS901214 GS901214 CMS901214 CK623281 CK623539 K623281 K623539 RK623281 RK623539 1412109 2608248 545002W200 545002W600 CP5269 BK623282 BK901215 CB60354PR CB60354 MS901215 GS901215 CMS901215